Residential Furnace & Heating Repair24/7 Emergency Phone Line

24/7 emergency phone line · San Francisco, San Mateo & Santa Clara counties

Emergency Furnace Repair in the Bay Area

Need urgent furnace help? Call to discuss the earliest available appointment. We diagnose no-heat issues, ignition faults, and other residential heating failures.

  • Experienced Heating Technicians
  • Clear Repair Recommendations
  • All Major Brands Repaired
  • $75 Diagnostic Fee Waived With Repair

24/7 phone line · Appointments subject to availability · $75 diagnostic waived with completed repair.

Technician diagnosing a residential gas furnace
Experienced TeamServing the Bay Area
Repair FirstWhen repair makes sense
Upfront PricingApprove before work begins
Local ServiceServing Three Bay Area Counties

Our service area

Cities We Serve for Heating & Furnace Service

Serving homes across San Francisco, San Mateo and Santa Clara counties. Call us to confirm service availability and scheduling at your address.

San Francisco County

San Francisco

San Mateo County

AthertonBelmontBrisbaneBurlingameColmaDaly CityEast Palo AltoFoster CityHalf Moon BayHillsboroughMenlo ParkMillbraePacificaPortola ValleyRedwood CitySan BrunoSan CarlosSan MateoSouth San FranciscoWoodside

Santa Clara County

CampbellCupertinoGilroyLos AltosLos Altos HillsLos GatosMilpitasMonte SerenoMorgan HillMountain ViewPalo AltoSan JoseSanta ClaraSaratogaSunnyvale

See your city? Call to confirm the earliest available heating repair appointment.

Call (650) 235-4121

We Fix the Problem

Common Furnace Problems We Diagnose

We diagnose the repair problems Bay Area homeowners search for most often. You do not need to know what failed before you call.

❄

No Heat From Vents

Your furnace runs but your home stays cold, or no warm air comes through the vents.

↗

Blowing Cold Air

The blower runs, but the air feels cold. We check ignition, burners, airflow, and controls.

⏻

Furnace Won’t Start

We inspect the thermostat, power supply, ignition system, and safety controls.

💧

Furnace Cycling On and Off

Short cycles can be caused by restricted airflow, overheating, or control issues.

◉

Pilot or Ignition Problems

Ignition and flame-sensing issues can stop a furnace from producing heat.

▰

Weak Airflow

We check filters, blower motors, ductwork, and airflow restrictions.

♪

Rattling or Banging

New rattling, grinding, or banging sounds deserve prompt inspection.

⌁

Thermostat Not Responding

We diagnose thermostat, wiring, and control communication problems.

Not sure what is wrong?

That is what the diagnostic visit is for. We will inspect the system, explain the cause, and give you the repair price before work begins.

Call Ace Air

Honest Repair Without Sales Pressure

Clear Answers Before You Approve Repairs

We focus on explaining the problem, the available options, and the cost before you decide.

🛠

Repair Before Replacement

When a safe, economical repair makes sense, we explain that option first.

💬

Clear Diagnosis

We explain what failed, why it failed, and what is needed in plain language.

$

Upfront Flat-Rate Pricing

You approve the repair price before work begins. No surprise charges afterward.

What Happens Next

What to Expect During a Furnace Repair Visit

No guessing and no surprise work. You stay informed from the first call through final system testing.

1

Call or Request Service

Tell us what the system is doing and choose the earliest convenient appointment.

2

We Diagnose the System

A heating technician inspects the equipment and identifies the cause of the problem.

3

We Explain Your Options

You receive a clear explanation and upfront repair price before work begins.

4

You Approve the Repair

We proceed only after you understand and approve the recommended work.

5

We Repair and Test

We complete the approved repair and verify that the system is operating correctly.

Furnace repair, explained

What Our Furnace Diagnostic Looks For

Practical information to help you understand your options before scheduling service.

Ignition and startup

If a gas furnace does not ignite, a technician may check the thermostat call for heat, ignition components, flame sensing, and safety controls. Repeated attempts to restart a failing furnace are not a substitute for diagnosis.

Airflow and blower operation

A dirty filter, restricted return, or failing blower can reduce comfort and cause shutdowns. We look at the whole airflow path rather than assuming every no-heat call needs a major part.

Thermostats and electrical controls

Intermittent heating can involve thermostat settings, low-voltage controls, switches, or electrical connections. Testing helps narrow down the cause before a repair is recommended.

When to stop using the heater

If you smell gas, leave the area and contact your gas utility or emergency services from a safe location. If you suspect carbon monoxide exposure, get outside and seek emergency assistance. Do not operate equipment that appears unsafe.

What happens at the appointment

We start with the symptoms you noticed, inspect and test the system as appropriate, explain the likely cause and proposed work, and discuss the price before proceeding. The $75 diagnostic fee is waived when you complete the repair with Ace Air.

Request Service / Estimate

Request Heating Repair

Tell Us What Your Heater Is Doing

Share a few details and we will contact you about scheduling. For urgent heating problems, please call.

✓ 24/7 emergency phone line✓ $75 Diagnostic Waived With Repair

Need help now? Call (650) 235-4121

Verified customer feedback

What Ace Air Customers Say

Real customer reviews from Ace Air’s existing Google business profile. These testimonials are about the team’s previous work and are not represented as Bay Area customer reviews.

★★★★★

“The Company is great. They installed a new furnace several years ago and the warranty had expired except for the actual parts. The technician fixed my problem and did an inspection. The amazing thing was he did the work at no cost!”

Tom Fitzgerald · Google review
★★★★★

“Friendly and professional. Highly recommend!”

Brenda Sovocool · Google review
★★★★★

“Walter is wonderful! He was punctual, kind, professional and very knowledgeable about our AC issues. I highly recommend Ace Air and Walter!”

Kelly Gaughran · Google review

Review excerpts are attributed to the original reviewers. Some customers reviewed service performed outside the Bay Area; no review is presented as a local Bay Area job.

Before You Call

Furnace & Heating Repair Questions

Clear answers to the questions Bay Area homeowners commonly ask.

Do you offer same-day furnace repair?

Same-day appointments may be available depending on technician scheduling and parts. Call our 24/7 number for the earliest available appointment.

How much is the diagnostic fee?

The diagnostic fee is $75 and is waived when Ace Air Bay Area completes the approved repair.

Do you repair different furnace brands?

We troubleshoot many common residential furnace and heating systems. Tell us the make and model when you call.

Will you recommend replacement instead of repair?

We explain repair options first when they are safe and practical, and discuss replacement when it is the more sensible long-term solution.

What areas do you serve?

We serve San Francisco, San Mateo, and Santa Clara counties.

Can I call after business hours?

Yes. Our emergency service line is available 24/7. Appointment availability varies.

Furnace or Heater Not Working?

Get an Honest Diagnosis and a Clear Repair Price

Call Ace Air for residential furnace and heating repair throughout the Bay Area. Our phone is answered 24/7.

Residential heating comfort and professional furnace service
Call Now: (650) 235-4121